I purchased mine off of eBay for around $1,000 delivered to California. Shipping was quick (maybe 7 days).
For those considering this modification/enhancement, I just installed them this morning completely by myself and had all four brackets installed in under 45 minutes. I did not use a lift, just put the vehicle in off-road high mode and was very easy to get to everything.This instructions that were provided are found on YouTube… don’t worry about the Chinese writing, your phone can easily translate it but you don’t need the words as the video shows everything (link below). Note - the motor arms go in the rear. Mounting the running boards took another 20 minutes. Connecting the aftermarket control module took under three minutes. You remove four 10 mm bolts from the trunk to get under the spare tire kit area and plug it into the existing wiring. You do not need to run any wires at all as the wiring is pre-ran from the factory from the trunk to the undercarriage. Reinstalling the undercarriage installation requires you to cutout a section to accommodate the motors but it’s easy with some strong shears and it is pre-cut from the factoryso you just cut along the lines.
Disclosure: the aftermarket controller deploys the steps when the doors are open and retracts when closed. This does not allow you to enable/disable the feature from Pivi like a factory option does. For that, I ordered an OEM control module off of eBay and am having the car coded for the option. My coder is out of town so it may be a month or so but I will post when complete. The OEM control module part should be VPLRP0486 for a 2024 RR LWB.
Install video link
View attachment 316762