The 2010 LED tail lights are very easy to install. No errors lights when we turned on the car. The only issues was the fast blink for the signal light. Installing a resistor to fix that part. Very easy upgrade and definitely worth it. Only thing you have to do is drill out the old tail light housing and buy the factory grommets from the factory.

 

What is the part number for the new grommets? The Dealers telling me they come with the taillights only.

 

your best just buying grommets from a car parts shop.you can buy the factory ones but they fit into a oval hole which is pressed at factory.I have yet to find a oval drill bit!
just to add to this discussion I would like to highlight a problem with wiring these lights. I have had them fitted to my car for the last few months and noticed when parked next to a 2010 range rover my side lights were MUCH brighter than the 2010 car. after investigation I realised that the side lights should only be fed with 6 volts. I purchased a small voltage convertor from maplins which has a 12v input and variable outputs of 1.5,3,4.5,6,7.5,9,10.5volts. I wired this unit between the feed from car and the side light feed.
The lights are now adjustable and look the correct brightness at 6volts. I am just pointing this out as anyone running 12v through the lights is probably overpowering them and may shorten there lifespan.As they are a sealed unit it could be a costly repair.

 

How do you power the sidelights? I installed these on my 08 and I dont have the fast blink problem. In 2007 the put in a new lighting module. The rear fogs are on still. I dont have my sidelights on. How do you power them? I just unplugged the the bulb and left the harness hanging. Theres no plug on the new lights for the side lights.

 

1.What do you mean by Side Light? Am I right, that you only have them in US, and in UK or Russia, we do not have this side lights?
Is this Yellow/Red lights all US car have? If yes, that I don't need them to install.

2. How id you manage to install a new light module? Did you just purchase it from 2010 and then plug it to 2007?
I have 2006 and I'd like to install new 2010 rear lights, and would like to know, if I'll just put the new lighting module will everything just work as it should, or anyway I'll need some resistors and relays?

Thanks!

 

Sorry to confuse I meant tail lights (the 4 red led rings on the rear of car) not the side marker lights.

 

How do you power the red strip on the side of the taillight? On the old taillight there was another socket and wiring harness with a 194 wedge bulb the new taillight doesnt have the socket.
http://www.vincentwong.com/v1/pics/newrover7.jpg

 

Awesome work, I just ordered a set of 2010 Taillights.

Going to look into buying the resistors and grommets. Any tips on where to buy both these items?

Anyone know of a shop in San Diego or Los Angeles, CA that could help with the install?

Thanks all,
Rob

The 2010 LED tail lights are very easy to install. No errors lights when we turned on the car. The only issues was the fast blink for the signal light. Installing a resistor to fix that part. Very easy upgrade and definitely worth it. Only thing you have to do is drill out the old tail light housing and buy the factory grommets from the factory.