RangeRovers.net Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hi My wipers on my P38 DSE 2000 suddenly decided to park on the middle of the windshield. Everything works but the synch is someway interrupted. Any Ideas?
 

·
Registered
1995-2002 Range Rover Classic
Joined
·
1,413 Posts
the wiper function is controlled by the BECM, you need to connect a land rover scanner and inquire.
 

·
Super Moderator
Joined
·
2,433 Posts
Although the BeCM only takes it's information from the park contact in the wiper motor. I'd suspect a faulty park switch in the motor.
 

·
Registered
Joined
·
32 Posts
mine did just this....parked vertical.....(nobody above has recently done this....i can tell from relpies....and i respectfully already asked richard this and he has been great to me !!!)

but this is a solution

with a little delicate wangling...you can unbolt the bottom of that plastic cover that covers the wiper motor
enough without taking all the stuff off......
and get in there with a wrench on that motor pivot bolt and loosen the bolt and re position the wipers...i may take a few times....but
its alot easier than taking off all the trim....and forget messing with the becm.....and this is so do-able.....
 
1 - 4 of 4 Posts
Top