Range Rovers Forum banner

Wheel Center Caps?

7633 Views 7 Replies 3 Participants Last post by  p38arover
I just bought new center caps for my wheels and I was wondering if there's a way to change the center caps on the wheels without removing the wheels?
1 - 4 of 8 Posts
rrtoadhall said:
Depends on if you want to save the old ones. If they are to be scrapped just pop a screw drive into the middle of them and pop them out. If you want to save them it's best to remove the rims and pop them from the back side to avoid any damamge.
The old ones are not in real bad shape so I would like to save them for spares...I just don't want to have to go through the trouble of taking the wheels off just to remove the caps.
Mission Complete!!! :dance: I was able to pry the old caps out using a combination of nylon pry tool and a small flat head screwdriver...didn't damage the wheels or the center caps `)
p38arover said:
Put a couple of spots of silicone rubber on the new ones so they don't fall out.
Too late for that...I already put the new caps on right away but they fit pretty snug so I don't think they will fall out...I'll keep the silicone in mind for the next time I have the wheels off...Thanks!
1 - 4 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top