RangeRovers.net Forum banner

1 - 4 of 4 Posts

·
Registered
1995-2002 Range Rover P38A
Joined
·
1,219 Posts
Discussion Starter #1
How do these fit guys? Are they just stick on or do they have hidden fixings?
I don't have them in my car, but have the chance of a complete set.
 

·
Registered
1995-2002 Range Rover P38A
Joined
·
865 Posts
If memory serves me right they clip in, best to do with door panel off if you want to remove old as its easier to nip clips from inside which aids in removing wood trim
 

·
Registered
Joined
·
640 Posts
Have a Set in the Garage from a P38 Wesminster and they are Retained in Place by Three 5mm nuts (8mm Spanner size), can't see they should be any different on any other variants. So you will need to remove the door panels to fit them.
Not really sure, but aren't the door panels different in so much that the ones with the cappings have a recess for the capping to fit into?

Cheers
 

·
Registered
Joined
·
401 Posts
Retained in Place by Three 5mm nuts (8mm Spanner size)
Agreed, mine has 4
 
1 - 4 of 4 Posts
Top