RangeRovers.net Forum banner

1 - 4 of 4 Posts

·
Registered
2002 P38 4.6 HSE
Joined
·
87 Posts
Discussion Starter #1
Probably the most worthless question ever.
When we got our RR(New), when we set the alarm, we would hear the horn beep, along with the turn signals blinking.
About 4 months ago, the horn stopped beeping. The alarm works fine.
When I changed the "radiator to expansion tank" hose on Saturday, I had to remove the battery cover.
When I replaced it, the beep came back when I set the alarm.
Well. I left the RR over night. The next day, the beep was no more when I set the alarm.
What might be causing this?
I know it's trivial. But it's just something I want to fix.
 

·
Registered
Joined
·
453 Posts
Are you talking about a beep beep when you arm the alarm?

If so this is showing that there is a door, window, sun roof, bonnet or boot open
Usually with the breach displayed on the dash.

With no bleep bleep when armed it shows all is well
 

·
SUPER MODERATOR
Joined
·
27,759 Posts
...and more often than not it is the bonnet switch that either needs adjustment, is loose in it's clips or should just be bypassed.
 

·
Registered
2002 P38 4.6 HSE
Joined
·
87 Posts
Discussion Starter #4
Really. I guess I've had a faulty "beep - beep" from the beginning. That's funny. Looks like it works right now. Thanks!
 
1 - 4 of 4 Posts
Top