Salisbury 60d Rear
Join the discussion
Recommended Reading
-
Help! Block off Oil Cooler ports 4.2/3.9 with Vee Belts what is the thread size or part number for plugs
Range Rover ClassicI dont need the cooler and just want to block these ports. The only info I seem to find is for the 1995 serpentine covers and later that apparently have m20-1.5 threads. Just can't find anything that confirms the threads for the earlier cover with vee belts Any confirmation would be greatly...- 5
- 80
-
RRC Inner Axle Seal
Range Rover ClassicI'm working on an overhaul of the hubs/swivel balls for my 1990 RRC. I have the front passenger side stripped down to the axle, and now I have a question on what i see inside the axle. There is clearly some sort of "seal" inside the lip of the axle (purple arrow), and this seal doesn't...- 0
- 28
-
Coil to amplifier wire type
Range Rover ClassicI'm putting in a RPI amp/coil/dizzy as replacement for the Lucas setup but want to keep the Lucas as a backup in case of issues (which I've read about). The RPI amp came with a 2 conductor lead wire that is easily 20" shorter than the original and as I want to mount the amp next to the coil on...- 0
- 47
-
What's the likelyhood of Head BOLTS breaking using TORQUE vs Impact Driver?
Range Rover ClassicThe two rear bolts nearest the firewall LH side ( and maybe someothers) holding the heads ARE NOT BUDGING with my impact driver, so I was considering using a cheater bar to remove them. Im not a full time mechanic and Im hoping that will work and not break the bolts. Anybody have an opinion on...- 27
- 339
-
Range Rover Classic ´95 Sunroof Adjustment
Range Rover ClassicHi everybody! I´ve changed the control unit of my sunroof - the Range Rover was sitting outside for a few years and the unit, probably with moist was damaged... Right now I install a new (used) one as stated in the RAVE manual - with the V notch in the position "zero", but the motor doesnt stop...- 0
- 50
Join now to ask and comment!