Range Rovers Forum banner
1 - 3 of 3 Posts

·
Registered
2016-2018 Range Rover MkIV / L405
Joined
·
258 Posts
here is another possible sitch (situation) I had a 300 SDL many years ago with the same issue, I don't know what your knock sounds like but mine was not a tick it was a knock that did get louder coming from the engine. Well it was # 6 cylinder that the rings were shot and the piston was slapping knocking against the sleeve. Long and short I did new sleeves in all six cyls, crank redone with new pistons and bearings, I reused the rods, put it all back together and it was perfect. So you might need to inspect the cylinders to determine this.

Just my thoughts...Good luck though I hope it's something much less drastic.

Cheers
 

·
Registered
2016-2018 Range Rover MkIV / L405
Joined
·
258 Posts
Good to hear it doesn't sound too major, let us know what failed when all is said and done.

Cheers!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top