RangeRovers.net Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello. I'm new here and I'm finally became proud owner of 94 RRC 4.2. Problem is: previous shop who did repair took of all upper part of the engine and now I have dilemma what to do: ether use a used 4.2 or try to find information how to install short 4.6 or look for rebuild 4.2. All advises will help. Thanks
 

·
Registered
Joined
·
523 Posts
Not really clear on your situation. Are you saying that the top half of the engine is missing, or that it has been dismantled and needs a rebuild? If so, is the engine shot?
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Hello. The engine is frozen, upper parts are out. Would happy to rebuild but don't have ability. Thinking of swap with used one or find who can rebuild it or I've heard about installing 4.6l but don't know procedure. Also for used engine what I have to look for.
Thanks
 

·
Registered
Joined
·
374 Posts
You need to update your location, but if you're state side, call Will at http://www.roverguy.com/
He has two lower mileage 4.2's for sale, $1200.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
Hello
I'm in San Francisco, ca. I found one used one with 100000 mi at LKQ, but question is if I will install used one what I have to update in this engine.
Thanks
 

·
Registered
Joined
·
523 Posts
If it's like-for-like it should just drop in.
 
1 - 6 of 6 Posts
Top