Range Rovers Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
174 Posts
I would go through whatever connections you can find, remove the connector and replace it. Just pull it off and reseat it, say two or three times. I suspect a connector with corrosion on a pin. Temperature related issues, unless that was a coincidence, are typically by changing clearances. Reseating connectors will likely clear the problem, unless the ones you addressed are not the culprits. Ray
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top