I always take the shock towers out. Initially tried it the other way and had too many damaged fingers. It is also wise to get some spring compressors.
Mounting Front Coil Springs Question
Hey guys-
Inherited a set of 2" lift springs. 8) The rear installation looks pretty straight forward. Do I have to remove the shock towers when installing the fronts, or can the springs be wiggled out and into place with just the lower shock attachment undone? (It's a 92... shock runs thru the center of the front coils)
Thanks
Inherited a set of 2" lift springs. 8) The rear installation looks pretty straight forward. Do I have to remove the shock towers when installing the fronts, or can the springs be wiggled out and into place with just the lower shock attachment undone? (It's a 92... shock runs thru the center of the front coils)
Thanks
1 - 2 of 7 Posts
Removing the shock towers are pretty easy, only 4 nuts. The only other thing you have to undo is the bottom of the shock, but you have to do this no matter what you do.
1 - 2 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Range Rovers Forum
We’re a community forum to discuss and assist on issues with every Range Rover model. Sign up if you have a question, answer or to meet like minded individuals
Full Forum Listing
