Range Rovers Forum banner

Inboard seat belt latch and rear wiper replacement

2257 Views 4 Replies 4 Participants Last post by  RRToadHall
I'm not new to Land Rovers, having a Classic LWB and a Discovery, but the P38 has me scratching my head on a few things. How do you replace the rear wiper blade and NOT disconnect the battery (not a wise thing to do on a P38...)? How do you replace the inboard side of the outer right passenger rear seat belt buckle? There is no clear access. There are screws on the metal seat pan underneath and one screw on the plastic cover, visible from above. Since seat belt anchorages are supposed to be very secure, I cannot imagine that these are the securing points for the latch!
1 - 2 of 5 Posts
Thank you both! Is there an extensive factory manual that would have covered both of these procedures? The P38 is one complex vehicle compared to the simplicity of the Classic and Discovery. Nothing is intuitive in its repair procedures!
1 - 2 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.