Range Rovers Forum banner
1 - 5 of 5 Posts

· Premium Member
Joined
·
259 Posts
Discussion Starter · #1 ·
Hi guys, I purchased these SVO style armrest chrome knobs for my 2017 RRS HSE Dynamic thinking I could follow this YouTube installation video. It appears that the inside of the L494 armrest is different than the L405 in the video. More importantly, I'm being able to unclip one side of the trim, but I can't get the other side to budge. I try and try and I'm about to break my trim tool and the other side will not move at all. I was wondering if any of you have installed these knobs or have ever removed the center armrest trim.

Thanks in advance for your help!

Jose





 

· Premium Member
Joined
·
259 Posts
Discussion Starter · #2 ·
Hi guys,

Don't mean to resurrect an old thread but another member just PMd me asking if I was ever able to figure how to remove the clip and install the SVO style knobs. I was! I'm attaching a couple of pics here to show where to grab the clip and how to pull it out. I also confirmed with the dealer that one side of the trim unclips, but the other doesn't. You just have to work carefully.

I'm also including a few pics of the finished armrests, which turned out beautiful!

Hope this helps someone else in the future.

Jose
 

Attachments

· Registered
Joined
·
7 Posts
Hi guys,

Don't mean to resurrect an old thread but another member just PMd me asking if I was ever able to figure how to remove the clip and install the SVO style knobs. I was! I'm attaching a couple of pics here to show where to grab the clip and how to pull it out. I also confirmed with the dealer that one side of the trim unclips, but the other doesn't. You just have to work carefully.

I'm also including a few pics of the finished armrests, which turned out beautiful!

Hope this helps someone else in the future.

Jose
hi Jose,

many friend just fitted these on my RRS today. He wasn’t able to reclip the bottom of the passenger sidearm rest. Any tips or advice on how to get it clipped back in?

Thanks,

Rach
 

· Premium Member
Joined
·
259 Posts
Discussion Starter · #5 ·
hi Jose,

many friend just fitted these on my RRS today. He wasn’t able to reclip the bottom of the passenger sidearm rest. Any tips or advice on how to get it clipped back in?

Thanks,

Rach
Hi Rach,

I had the same problem. Mine is not completely reclipped. There is a small gap left. The problem is that you cannot take it apart to see what could be the issue. From what the dealer told me taking it apart would break the whole thing. So, I decided to leave mine alone. It's barely noticeable.

Sorry I couldn't be of more help.

Best,

Jose
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top