RangeRovers.net Forum banner

1 - 3 of 3 Posts

·
Registered
2006-2009 Range Rover Sport
Joined
·
16 Posts
Hello all,

A little history first

2008 sport 150,000 + miles very well maintained, in the last year I've replaced all 4 air springs and the compressor. The compressor was a aftermarket replacement, the original one seemed good (still have it) just changed it since I was doing the air springs. The problem I'm having is the yellow/red arrows with the car in the middle warning. When I scan with my ILAND I get multiple module faults, RLM, ARCM,BCM all communication errors. Where do I start? I cannot do a suspension height calibration since it says it won't communicate. Thanks

codes U034-86 C1B03-19 C1B1-00 U0182-87
 

·
Registered
2006-2009 Range Rover Sport
Joined
·
16 Posts
Discussion Starter #2
So after checking and finding no corrosion on any connectors I can only assume a module is bad. I spoke with ILAND tech support and after loading the app again I still had a communication error. I hate he thought of going to the dealer only to have them change a simple module and charge me .
 

·
Registered
2006-2009 Range Rover Sport
Joined
·
16 Posts
Discussion Starter #3
Update,

Playing around with things I was able to adjust the suspension height calibration, not 100% perfect but very close. Took about 10 times of entering fake measurements to trick the system to accept. All codes still active.
 
1 - 3 of 3 Posts
Top