Range Rovers Forum banner
1 - 3 of 3 Posts

·
Registered
1995 County LWB, 2006 MkIII / L322h
Joined
·
39 Posts
Discussion Starter · #1 ·
I have a ‘06 HSE with a blown head gasket at 180k miles. I’m sourcing a replacement engine and I’m wondering, with the new engine, what I should do to it prior to installation. Are there any old components that I should not reinstall but replace as well? Just thinking of how much easier some of these things would be with the engine on the bench.

Thanks.
 

·
Registered
1995 County LWB, 2006 MkIII / L322h
Joined
·
39 Posts
Discussion Starter · #2 ·
The ‘new’ engine has 88k miles.
 

·
Registered
1995 County LWB, 2006 MkIII / L322h
Joined
·
39 Posts
Discussion Starter · #3 ·
So, just bump/nudging here:

I'm thinking
1. water pump, thermostat
2. plugs
3. belts and hoses
4. radiator flush

If the 'new' motor has 88k on it, would you replace timing chain or tensioners, etc?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top