Range Rovers Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
hey guys im a new 2009 RRS owner and im also new to this site. I went out to start the RRS this morning as soon as I started it the high beam symbol came on and will not go out even with the key removed they are still on .I performed a battery reset with no luck. there is no response from the stalk and when I put the fog lights on they still stay on. please let me know what you guys think. Im a bmw master tech so if there is anything I need to check in depth just let me know. thnaks
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
if this helps its the flash to pass lights no the bi xenon high beam. also if I unplug the turn signal switch they are still on and the blue high beam symbol stays lit even after the vehicle turned off.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
to make a long story short I had a water leak at the RF a pillar leaking onto the CJB. LR replaced it and then my power striker for the trunk stopped working I thought it was a coding issue. after returning to LR they ordered another CJB and I'm waiting for it to arrive from England.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top