Range Rovers Forum banner
1 - 1 of 6 Posts

· Registered
1995-2002 Range Rover P38A
1,851 Posts

Apply ample copper anti seize on all the bolts before assembly. This will make sure you will not break them again during a dismantling job in the future.

To extract the broken bolts use a set off tools like:

http://www1.conrad-uk.com/scripts/wgate ... 1&cookie_n[1]=uk_insert&cookie_v[1]=8V&cookie_d[1]=&cookie_p[1]=%2f&cookie_e[1]=Tue%2c+01-Sep-2009+16%3a35%3a52+GMT&scrwidth=1024

Do not use the tappered shaped easy out extractors. These will jam the bolt tighter and cause you to break the easy out in many cases.


1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.