Range Rovers Forum banner

front spoiler solution if you take it off/put it on alot

1787 Views 10 Replies 5 Participants Last post by  dutchfrompredator
hi all,
i devised a handy little method of clipping down my front spoiler for when i remove it and put it back on. eventually you lose a couple of the clips that attach it or it warps a little and doesn't want to fit flush with the bumper or you break one of the studs that fasten it. well everyday life to the rescue! i have an abundance these little office clips around, you guessed it, the office, and the small ones are great for adding as additional or replacement clips when you reattach the ol' spoiler. the smaller ones are the perfect size and they're practically free. actually in my case they are free. they're rather sturdy too and you don't care if you break or lose them. :D

Attachments

See less See more
1 - 1 of 11 Posts
Mine is stuck on. I tried to take it off once, the clips are all off, so it should just fall off. After 3 solid years of driving no clips and the plastic screws off it still is there. I tought it would come off in the woods going over bushes and snow banks, but still there. I can only guess that somehow in the first 11 years of the vehicles life that the plastic just fused.

You have the perfect solution - simple and cheap and effective.

So, is there a mph benefit to putting it back on?
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top