Exhaust Tailpipe Tips - 2013 RRS HSE Lux

955 Views 3 Replies 3 Participants Last post by MI2VA, Dec 6, 2018

GSquared2017

Discussion Starter · Dec 5, 2018

Hey All,

I have a 2013 Range Rover Sport HSE Lux and have been looking everywhere for nice chrome tailpipes. It seems that all pipe tips, even universal fit, only go up to 2012 RRS. Mine are 7.5 inches long and straight. The oulet width is 2.38 inches and I would like the outlet of the pipe itself to be around 3.5 to 4 inches. The circumference of the pipe is 7.5 inches and consistent along the entire 7.5 length. I would like to stay with a name brand if possible, (Borla, Magnaflow, Gibson).

Any help or guidance is greatly appreciated.

Cheers,

Gerry

Save

1 - 4 of 4 Posts

PJPR01

· #2 · Dec 5, 2018

For my 2013 HSE LUX, i went to my local muffler shop, they had a huge selection of nice looking non resonated tips, they cutoff a piece of the pipe, and welded in a nice set of tips that look similar enough to the Borla tips I had on my 2006.

Find a custom muffler shop and you should be able to do the same in your locale.

Save

GSquared2017

Discussion Starter · #3 · Dec 5, 2018

Thanks!!

Are you against clamp-on pipes? Do they loosen and fall off over time.

Gerry

Save

MI2VA

· #4 · Dec 6, 2018

I also went to my local muffler shop and had tips welded on after they cut off the resonators. But before the new tipe could fit they had to remove the counter weights. After a few years I looked for new tips and found 3.5" tips that were about 10" long at O'Reilly auto parts. They were clamp on and I ended up riveting them on. I still love them.

See less See more

Save

1 - 4 of 4 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Exhaust Tailpipe Tips - 2013 RRS HSE Lux

GSquared2017

PJPR01

GSquared2017

MI2VA

Attachments

Top Contributors this Month