Range Rovers Forum banner
1 - 4 of 4 Posts

· Registered
1970-1995 Range Rover Classic
Joined
·
35 Posts
Discussion Starter · #1 ·
Hi

Remind me please where will I find the 5 pin relay that needs to be changed to a 4 pin to prevent the EAS trying to self-level when parked on uneven ground?

Is it one on the underside of the passenger seat (UK)?

Has anyone tried this and does it work without affecting other functions of the EAS?
 

· Registered
Joined
·
398 Posts
In my 1995 NAS LWB, it’s located under the passenger (right-hand) seat, in the right-rear corner. If you replace it, keep it in the glovebox as you’ll need it to run EAS diagnostic software.
 

· Registered
1970-1995 Range Rover Classic
Joined
·
35 Posts
Discussion Starter · #3 ·
In my 1995 NAS LWB, it’s located under the passenger (right-hand) seat, in the right-rear corner. If you replace it, keep it in the glovebox as you’ll need it to run EAS diagnostic software.
Cheers, so just to clarify, I change the 5 pin for a 4 pin but keep the 5 pin for running the diagnostic programme. Any way to identify the relay amongst others or is it quite obvious? Mine is a ‘94.
 

· Registered
1995-2002 Range Rover Classic
Joined
·
1,786 Posts
its a big rectangular white unit marker trw or twr, as you face the inside of the vehicle standing outside it will be to the far rear of the seat.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top