Range Rovers Forum banner

EAS-reset sync problem

6463 Views 16 Replies 4 Participants Last post by  Edable

I've bee trying this all day long. Double checked all the wiring a couple of times, is seems to be fine.

tried almost every possible combination of the delays. Also I've been trying this with two different serial ports - the one on the docking station of my thinkpad, and a USB/serial prolific dongle - both worked fine a lot of times with a lot of devices I'm working with.

Any advices what to look next. I can't wait for new cable, will have to make this one work.

this is what I get before the RX starts displaying 0,80,0,80 etc ...

I've checked almost every possible topic here and on the sourceforge forums too. I'm starting to think the OBD port of my RR is the problem :(

Any ideas ?
See less See more
1 - 3 of 17 Posts

From below I gather u finally sorted out the problem.Please can u give of how u made it to work in detail?

I ve disconnected the ECU and now use jumpers to pump up my balloons.

Sorry am a little out of tune,how do you change the regional settings of windows
Thks Man, will try it out and see if something comes up.
1 - 3 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.