Range Rovers Forum banner

eas mysterious soft fault

1059 Views 12 Replies 3 Participants Last post by  benji
Hello all,

My name's Benji, I'm new to this forum; however, I was wondering if some could help me.
I've a 93 rangie that will log a fault code if left on access mode for more than 6 hours (self levelling time). I've not been out there to see what it does at the six hour mark yet.
If I leave it on any other hight overnight i't's fine.
I assume the intake and outlet valves are all working fine, as I can stand or lift each corner of the vehicle and it pumps up or down to re-level without fuss.
I assume the soloniod valve is fine as no air escapes the outlet pipe during pumping, and no air escapes the inlet pipe during settling.
All the bags are fine as they're new arnott 3.
Any help would be greatly appreciated.
1 - 4 of 13 Posts
may be a bad spot on a height sensor, I had this on mine a while ago, it would only soft fault at access height, BUT I got a sensor fault on my reader.
rufant said:
... their location in the righthand pane,.....
I see that on the Left side, is that a new feature of the board? name/info appears depending on which side of the road you drive on? :D
rufant said:
Well done Dennis, you passed the test! I was wondering who would spot that :wink:

Your prize is in the post...

Do I get the M3? I wouldn't mind the Anglia, but the M3 is my first choice :)
1 - 4 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top