[shupack]

#1, worn out compressor. Dropping to access every time you stop, while within the original design will significantly shorten the life of the compressor. 1 hour to fill the tank is way too long, should be about 10-15 minutes with an OK compressor, 7-10 with a fresh comp.

dropping down that quickly is a function of the self leveling, if there are no leaks (possible with only 80k) then your height sensors need re-calibrated. fairly easy with Storey's software and not an un-common need.

 

[shupack]

I will be further checking for leaks. I am hoping for a leak at the tops of the bags and not block.

.

either way is leaky orings. If you have one leaky oring, you have 47 that are about to leak. Do them all at one time and forgedaboudit.

 

[shupack]

47 is a guess, I've never actually totaled them up.

4 on EACH valve x 7 valves = 28
3 check valves x 1 seat and 1 seal + 1 more port = 7
1 on the diaphragm = 1
4 on each airline (2 on each end) x 7 = 28
=

74

so I'm mathematically dislexic... pretty interesting...