Range Rovers Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
217 Posts
Hi,

Try to open/close a back door window and see if you get the same fault. The Becm send data bus signals to the door outstation and the door outstation then decode the signal to the doors, mirrors and windows, for me, is the outstation that is failing and when receive the signal just send it all over the place closing the front doors, then the front door locks and the back doors lock because of that.. Could be :)

Regards,
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top