Range Rovers Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
865 Posts
The grille is not plug and play, it took a couple of hours with a dremel, but I found an 18-19 grille on eBay for 200 bucks. But 2013-2017’s can do it. I love the refresh!

Land vehicle Vehicle Car Range rover Sport utility vehicle


Land vehicle Vehicle Car Sport utility vehicle Grille


Land vehicle Vehicle Car Range rover Sport utility vehicle

Land vehicle Vehicle Car Range rover Sport utility vehicle
 
  • Like
Reactions: afm903

·
Premium Member
Joined
·
1,558 Posts
Old headlights looks great with the new grille..I'd keep it as is..
 

·
Registered
2020 Range Rover / 2020 Audi R8 V10 Performance Spyder / 2022 Audi RSQ8
Joined
·
404 Posts
Looks great actually. Really updates the look of the pre facelift L405.

Headlights would be a nice touch but I think it would be way too costly and very technical as wiring harness is surely different for the 18+ LED headlights
 

·
Registered
2016-2018 Range Rover MkIV / L405
Joined
·
474 Posts
Looks great...can you take a few close-up photos around the lights where it meets the grill to see where you had to cut...
 

·
Registered
Joined
·
865 Posts
Discussion Starter · #8 ·
The 2019 grille does not fit as is. You you have take the old grille silver trim piece and use blue painters tape as a template for the Dremel cuts on the new grille . The new 2019 grille has a silver trim piece that pops out easily and you have to use a couple of screws under it to attach the bottom of the grille to the raised u shape holdings that are part of the old bumper raised in square holes that used to hold the old bumper. The cut outs aren't perfect but from 3 feet it looks great. A body shop could do a better job. I just wanted a refresh after owning the truck for Tire Rim Architecture Automotive tire Automotive exterior
Vehicle Auto part Automotive exterior Bumper Car
Bumper Automotive exterior Auto part Electronics Technology
years and not wanting to pay another 100k when this truck is paid for. There are some under neath plastic pieces of the new grille that need to shaved off like a double layer. If you buy a new grille and compare it to the old grille a lot of this will make sense. I also used two self tapping metal screws to hold down the top of the grill since the only thing that does line up are the center hood latch and each driver and passenger side hood latch. Land vehicle Vehicle Car Headlamp Automotive lighting
Land vehicle Vehicle Car Grille Headlamp
Tire Automotive tire Rim Wheel Auto part
The grille runs on eBay from 200-600 I found one for 200 and snapped it up.
 
  • Like
Reactions: afm903

·
Registered
Joined
·
865 Posts
Discussion Starter · #9 ·
Thank you everyone for the kind words. Headlights are 5-10,000 and won't fit and wiring plugs are different. There is an outfit that sells an 12,000 full facelift but mine cost 200 bucks and 3 hours! And the aftermarket stores don't have a 19 facelift grille made yet. I'm sure in a year or two they will. I just like being an early adopter and first on the block.
 

·
Registered
Joined
·
865 Posts
Land vehicle Vehicle Car Grille Bumper


Pic showing before I painted the front grille inserts silver below the headlights...explaining cuts
 
  • Like
Reactions: afm903

·
Registered
2016-2018 Range Rover Sport
Joined
·
299 Posts
Great job! It looks great!


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
827 Posts
haha what? its the 2018+ facelift grill for the pre-2018. You'll see it if you search ebay....it should say it in the decription but just look for the round cutouts for your lights as opposed to the square for the 2018 lights
 
  • Like
Reactions: mark1107

·
Registered
Joined
·
865 Posts
Discussion Starter · #19 ·
Search ebay 2018 range rover l405 facelift grille for 13-17 they run 1-300 bucks!
 
  • Like
Reactions: horse86
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top