Range Rovers Forum banner
1 - 5 of 5 Posts

·
Registered
2006-2009 Range Rover Sport
Joined
·
31 Posts
Discussion Starter · #1 ·
Ok let me try this again. I have an 06 hse with the 4.4 . Trucks been running fine, actually great. This morning I was on my way to work and I drove about a mile. Came to an intersection and stopped. Well when I stopped the truck died. No sputtering, nothing it was like I shut the key off and left all the accessories on. I tried to start it and all it did was crank over. I’ve checked the fuel pump ( working) I’ve checked spark ( have it) sprayed stating fluid into intake not even a cough or sputter. Any ideas, I need my baby running....
 

·
Registered
2006-2009 Range Rover Sport
Joined
·
31 Posts
Discussion Starter · #3 ·
I pulled the coil and used a spark tester that went into the coil and on the plug. As for the gas I was unable to find the fuel rail blender. It didn’t sputter or chug that’s why I didn’t think it was the fuel pump. I ordered a ob2 for Range Rovers to see if there are any codes. Can I use it with out my baby running? I really appreciate all the help and advice..
 

·
Registered
2006-2009 Range Rover Sport
Joined
·
31 Posts
Discussion Starter · #5 ·
Copy that, thanks. I won’t be home until the weekend. I’ll try and see if there is any codes. I’ve never had any lights or notifications other than my spare tire pressure is low. I’m hoping it’s just a sensor or relay.
 

·
Registered
2006-2009 Range Rover Sport
Joined
·
31 Posts
Discussion Starter · #6 ·
Ok so my battery was dead, my charger took a crap and I had to hook up my booster to use my obd2 scanner. What it is saying is there is no comunication with the imobilizer( lost comunication with imoblizer). Do I now need to have the it reset. And is that something I can do myself.
 

·
Registered
2006-2009 Range Rover Sport
Joined
·
31 Posts
Discussion Starter · #8 ·
Ok I talked to a vehicle programmer and he told me that it would not be my immobilizer due to the fact that I was driving when it died. He said that it’s only on start up. He told me that it’s my ecm and that’s why it’s saying can’t communicate with immobilizer. Does that sound about right. I’m out of town working and won’t be home until next weekend so I’m just going to have my baby towed to the dealership in Cleveland and have them fix it. All I can say is boy does my wife hate my truck, she’s a little jealous because when I’m home it’s been getting my money and time.
 
1 - 5 of 5 Posts
Top