RangeRovers.net Forum banner

1 - 4 of 4 Posts

·
Registered
1995-2002 Range Rover P38A
Joined
·
669 Posts
Discussion Starter #1
Ok, so got me a latter style replacement cruise ECU with plu and 2 inches of loom. However when i've tried to wire it in the colours aren't matching - i did the same to my previous 97 4.0 with no issues. however checking rave non of the schematics match - i have
Existing harness
Orange/red

Green/grey

Yellow/Red

Orange/blue

Orange/red

Grey/yellow

Orange/pink

Black

Orange/white

Red/orange

No plain yellow that is on all the wiring diagrams.. any ideas please -- she's a 98 4.6 btw
 

·
Registered
Joined
·
566 Posts
Probably the later cruise ecu connector is from another car ? Maybe check the Disco 4.0 diagrams, or otherwise map it out based on pin connections.

BTW, my RAVE shows Pin 11 BECM to Cruise is Y on LHD and YR on RHD. Maybe you have NAS RAVE which is often different to UK vehicles ?
 

·
Registered
1995-2002 Range Rover Classic
Joined
·
1,413 Posts
do a search, someone posted details about this mod. also there is a guy running a blog or a p38 upgrade and dys website with full details on cruise conversion and wiring. will look for link and post when found.
 
1 - 4 of 4 Posts
Top