[Gurmot]

My 91 Vogue is going back together nicely but I don’t have the plastic plugs that go into the holes in the floor to take the screws for the inner tread plates.

Does anyone know where to get these? The holes in the floor pan are square, something like 6mmx6mm.

Thanks

Simon

 

[RRToadHall]

They are similar to license plate nylon capture nuts. On this side of the pond they are available by the bin full at any auto body supply house and in various sizes.

 

[Gurmot]

They are similar to license plate nylon capture nuts. On this side of the pond they are available by the bin full at any auto body supply house and in various sizes.

Thanks, I will look into that. Just measured the square holes and they are 7mmx7mm.

 

[95classiclwb]

My 91 Vogue is going back together nicely but I don’t have the plastic plugs that go into the holes in the floor to take the screws for the inner tread plates.

Does anyone know where to get these? The holes in the floor pan are square, something like 6mmx6mm.

Thanks


Simon

aka rivnuts, or nutserts. you will need a rivnut tool, (similar to riveter but with threads). said tool yields better installation outcomes.​

 

[RRToadHall]

The tread plates do not use rivnuts. They are a plastic/nylon insert that snaps into a square hole.

 

[95classiclwb]

The tread plates do not use rivnuts. They are a plastic/nylon insert that snaps into a square hole.

my apologies for the mis information.