RangeRovers.net Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
163 Posts
Discussion Starter #1
Hi Gang,

Having had the dreaded book symbol for the aircon on my 2000 Vogue I had the blend motors replaced (as checked by a LR Indie). All worked for a day and then the book symbol appeared again. Took it back and he said now the HEVAC unit has packed up. I can control the temp but not direction.

So bought a new HEVAC unit and he is telling me that it HAS to go on textbook to configure it all..? Is this true. If there is nothing wrong with the motors and the HEVAC is new, can't I just remove the old Hevac and plug the new one in..??

Thanks folks....
 

·
Registered
1995-2002 Range Rover P38A
Joined
·
865 Posts
According to RAVE, yes it needs to be setup, according to most of us, no,
 

·
Registered
Joined
·
442 Posts
G'day, to set up blend motors correctly they need to be calibrated, this is why most of you have problems in the first place,make sure they are all in sync !!!!!!!!!!!!!!!!!!!!!!!!!!1 :thumb:
 
1 - 4 of 4 Posts
Top