Hope someone can help me out. I went over a pot of water yesterday, and the "Air Suspension Inactive" code came up at the dash. I have tried to do what showing on youtube by starting up the car then turn the steering all the way to the right then to the left. But the code remain on.
Hope someone here can help me reactive the Air Suspension.
You will need a hard reset, only possible with an appropriate diagnostic system. I highly recommend the one from Storey Wilson: http://www.rswsolutions.com/
Folks, using a gizmo to reset the code does not fix the issue. All you are doing is hiding the issue until it gets worse. Get proper diagnostics if you are going to work on your own rig. Then you can identify the actual issue instead of throwing parts at the system hoping something works.
Mine has been inactive since the very cold temps this past winter, and tried the resent with a Snap-on scanner but that was a temporary fix, I need to take it to the stealer to get this done, right now is in the up position the switch does not activate the suspension. Very depressing issues
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Range Rovers Forum
834.2K posts
122.2K members
Since 2004
We’re a community forum to discuss and assist on issues with every Range Rover model. Sign up if you have a question, answer or to meet like minded individuals