ABS Accumulator | RangeRovers.net Forum

1 - 1 of 1 Posts

rbarrero

·

Registered

Joined May 17, 2009

·

56 Posts

Discussion Starter • #1 • Jan 19, 2010

Hi guys - Just thought I'd let you know that "Miami Rovers" in FL, USA is selling new abs accumulators for $200 USD on ebay. I think it's a great deal and have already purchased one for my rover. I've never seen them for less than $230 online, and typically go for $350 retail.

http://cgi.ebay.com/ebaymotors/LAND-ROV ... 1133wt_942

Thanks,

Rafael

1 - 1 of 1 Posts

Recommended Reading

Gems V8 fuel rail/injector wiring bolt size?

Range Rover Mark II / P38

I've just repaired my rocker cover gaskets (and restored the rocker covers) and someone has taken this apart before and not put the bolts back. I am missing all the bolts for the fuel rail and injector wiring and couldn't find in the rave what the bolt size is. An M5 is too small and M6 too big...
- 2
- 63
- S
  sixandhishat · updated 60 m ago
Transfer Box/Viscous Coupling - Grinding Noise & No Drive

Range Rover Mark II / P38

Transfer Box/Viscous Coupling - Grinding Noise & No Drive Greetings all Search has been done but I haven't found anything with similar symptoms other than transfer chain failure, H-L shift movement failure, or viscous coupling failure in which the coupling locks up - none of which seem to be...
- 14
- 1K
- knottinbots · updated 1 h ago
Clearing the cobwebs

Range Rover Mark II / P38

Wrong part of the forum,,,,,no doubt Had, due to trying to rebuild our home post flooding, to collect a bed today , numpty on m18 northbound in a Jeep, decided to pull out from lane 1, I was in lane 2 sitting on cruise (yeh ha it now works) at 70mph indicated, into lane 2 where I was, to avoid...
- 2
- 41
- S
  scimitargtc · updated 2 h ago
Replacing scuttle [plenum] filter instructions.

Range Rover Mark II / P38

Could anyone provide a link to instructions for replacing the scuttle [or plenum] filter, please ? I have read through loads of threads about problems concerning these filters, and someone even posted an answer about following the posted answers in the forum somewhere but didn't bother...
- 12
- 271
- P
  Pierre3 · updated 2 h ago
2000 P38 not communicating codes

Range Rover Mark II / P38

Rebuilt engine 3 years ago and finally got a service engine soon light. Attempted multiple scanners and not getting any codes. Pulled the ecm and sent to module experts to reset and still no codes. Any ideas on what to test next? I need to get the truck passed smog in a month. Gino
- 4
- 115
- G
  GPP38 · updated 5 h ago