I'm a long time lurker, first time registerer (sp?). Anyway I reside in Saskatchewan, Canada a great place to own a RRC. I have had a Disco 1 and I currently also have a 63' Series 2A. I am by no means a competant mechanic just a backyard tinker with lots of tools and some times good luck.
I have had my RRC for a couple years and I love it but for awhile now, I have had the typical low idle in gear when hot issue. Recently though I have been hearing intermittent whistling when it's been rev'd and when the engine is warm (and I mean after it sat all night and the temp in mid-afteroon is quite hot) it starts fine but once started the idle seems to drop to almost nothing and nearly stalls. I can put my foot on the accelerator and still get power though.
Usually when it starts cold, it revs up to about 1200 then settles to about 500-600ish till the engine is warm then I get the low idle (but not complete stalling).
I have searched the forum and found great info and have down quite a few of the items and checks but I can't seem to narrow this down. The whistling type sound seems to be coming from under the hood (pretty sure) and I can't seem to locate any plenum leaks.
Any tips or hints would be appreciated.
I have:
new plugs and wires
new and recently cleaned IAC (GM part)
new vacuum lines
Welcome to the forum. You could try spraying some wd 40 around to find your leak, the idle should increase when it gets sucked in. I know the plenum is just sealed with silicon not a gasket, maybe that's where your leak is.
This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.
Range Rovers Forum
We’re a community forum to discuss and assist on issues with every Range Rover model. Sign up if you have a question, answer or to meet like minded individuals