Range Rovers Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
Hi, I have been offered a set of 20" OZ Canyon Alloys (RR III fitment) with 275/40/20 tyres fitted. Does anyone know if these will fit without problem or modification on my 97 P38. I know I will need the hub ring adapters and the later size wheel nuts, its just the width of the wheels that is a concern.

Failing that, will standard RR III 19" alloys and tyres fit?

Any help would be appreciated

Thanks
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #3 ·
Col said:
Running 275/45/20 on Supercharger Rims and have no Problems whatsoever.

Cheers
Fantastic :dance:

Thanks :thumb:
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #10 ·
Col said:
Not the Best of Pics.



Cheers
Looking very nice there Col. Just one more question, I have read that the later RR III's have a different offset and are not interchangeable with the early one's or the P38's. Do you know anything about this. The reason I ask is that if the deal with the OZ wheels falls through I will be looking at the standard 19 & 20, so just wondered if there were any incompatibility issues. Link here http://www.rangerovers.net/outfitting/t ... tires.html

To be honest, I found this to be confusing so if anyone has a straight answer, that would be great.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top