First is there a reason why my compas doesn't work on 4X4 mode? When I select it, it says something like it isn't available.... Second is there anyway to set the truck up to automaticly lower itself when you shut it off then go back to reg. when you start to drive or do you always just have to push the button yourself?
2 questions???
1 - 2 of 2 Posts
In order for the compass to show up on the screen, you need to set the system to Off road navigation vs. On road navigation, then go back in and the Compass will be available under various screens. (Check your manual for the various alternatives)
AS has been asked many times (search function is helpful), the car cannot automatically lower itself...you have to press the button.
After that, it will automatically raise from access mode to standard mode once you drive above 10 mph...no need to manually raise it unless you have it locked in Access mode in which case until you drive up 10 mph, it will stay in access mode.
AS has been asked many times (search function is helpful), the car cannot automatically lower itself...you have to press the button.
After that, it will automatically raise from access mode to standard mode once you drive above 10 mph...no need to manually raise it unless you have it locked in Access mode in which case until you drive up 10 mph, it will stay in access mode.
1 - 2 of 2 Posts
