Range Rovers Forum banner
1 - 1 of 1 Posts

·
Registered
1995-2002 Range Rover P38A
Joined
·
718 Posts
just rebuilding my 1998 4.6 and as previously mentioned the nuts corrode onto the srtub of the oil cooler despite days of soaking in penetrating fluid etc. cut the pipes slipped on a ring spanner and eventually got it off thus saving the oil cooler itself
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top