Range Rovers Forum banner
wired
1-5 of 6 Results
  1. Range Rover Mark II / P38
    Hello All, Found a brush bar with light bar (nudge bar?) and wiring loom for a Safari light kit on a '99 RR P38 4.6 LHD in a breaker yard. Safari lights were missing. Large green rocker switch present on instrument cluster bezel, side opposite fuel door button. Wiring loom was fitted to...
  2. Range Rover Sport II / L494
    First of all many thanks to Techbanker, FLM, and Eriq800 for their earlier posts concerning access to the overhead console and hard wiring into the existing harness. I've toyed with the idea of a dash cam but never had the initiative to go through with it. Fortunately there was not a sentinel...
  3. Range Rover Sport II / L494
    Finally got around to wiring my radar detector over the weekend and wanted to just share some of the details of the job with you guys. First of all, I'd like to thank everyone for the great information available here to us all. I found many posts regarding this topic and the info I gathered...
  4. Range Rover Mark III / L322
    I am borrowing my friends car to tow a 4000lb car on a trailer, not a tow dolly, It is equipped with a trailer Hitch, but idk if a wiring port for the brakes and lights are already there? I havnt seen the car yet. thought id as before i rent the trailer.
  5. Range Rover Mark II / P38
    Hi All, Follow on from the current drain thread. The GROM was draining about 100mA or slightly more with engine off and BECM asleep. Although not a huge amount I didn't like it. I cut the red wire emerging from the blue ISO GROM connector plug (the one that replaces the CD changer plug) and...
1-5 of 6 Results
Top