Range Rovers Forum banner
winch
1-15 of 81 Results
  1. Range Rover Mark II / P38
    I’m working with my fabricator on a winch mount at the moment but some additional feedback is needed. If I remember correctly the ARB bumper on the D2 mount onto the crush cans so I should be fine bolting my winch mount on the crush cans? They won’t pull apart or deform with the pull from the...
  2. Range Rover Mark II / P38
    I really hate getting stuck with no way to self recover other than a come-a-long so a winch is pretty high on my priority list. I was originally thinking of going to a Terrafirma front winch bumper but I really just don’t like the aftermarket look of them. Before I pay someone locally to build...
  3. Range Rover Mark II / P38
    Does anyone have one of these bumpers fitted. They sold me one but there's no fittings (long story and it doesn't end well) in the box, and no idea what is missing. Anyone got some pics they could send me (or post)? TIA
  4. Range Rover Mark II / P38
    I have a 2001 Vogue. I managed to get a full history and vin check from a dealer on another forum, and it lists a recall regarding a supposed Warn winch, that she had fitted. :geek: There seems to be little evidence of their being a winch on her, i'm assuming it was removed at some point, is...
  5. Range Rover Mark II / P38
    Gents, I made myself an winch bumper, most likely not compatible with/for airbag, but I don't care about that. What I do care about is that I wouldn't be happy if the airbags come out when I hit something lightly. Question is, with a non compatible winchbar, do the airbags come out too quick...
  6. Range Rover Mark II / P38
    This may be old news, but Land Rover have only just caught up with me, and I've owned my 1998 4.6 HSE for quite a while.... So, I got a safety recall notice relating to the P38 from Land Rover today - not bad considering it's a 20 year old car! It relates to the genuine front winch winch...
  7. Range Rover Mark IV / L405
    Anyone aware of any aftermarket companies offering either a front winch mount or underbody protection/skid plates for the L405 as of yet? Just installed lift rods and some 275/55/20s and would like to add a winch and some underbody protection before doing any significant off-roading. Also...
  8. Range Rover Mark IV / L405
    Friends, I have asked Warn Industries to consider introducing a winch mount for the L405, especially since there are gradually more and more folks with used ones that are more likely to be used off road. I got a nice reply from Russell Smith, [email protected], saying of course there needs to be...
  9. Range Rover Mark IV / L405
    Friends, I have been in touch with Andy Vix, proprietor of Voyager off road, makers of cool winch mounts, expedition racks etc for Range Rovers and Land Rovers. They have just made a cool rack for the new Discovery 5, see...
  10. Range Rover Mark II / P38
    After searching for the Factory Winch Tray for a while, and begging people who have one, to perhaps send me dimensions, I finally got my hand on a complete setup (minus the license plate brackets). I have decided to reproduce and sell the kit and see what kind of interest there is on this...
  11. Range Rover Classic
    Ok. Here's a tough one. I'd like to mount a winch on my 92 County. I have a 95 bumper, and OE Brushguard. The kicker is I also have a Rovers North steering guard mounted as well. So...where do I mount the winch? Originally I had intended to mount the winch behind the bumper and hang it...
  12. Range Rover Mark II / P38
    well its arrived! i noticed in scottys 'sale' he had a winch tray and he kindly agreed to ship to me in the uk and although there was an unexpected customs import duty to pay its brand new and one heck of a piece of metalwork so now i figure out all the other bits to fit it - quite a few steps...
  13. Range Rover Classic
    Afternoon Chaps! Next project is a winch :mrgreen:.... I've got the bumper, I've got the winch... well most of it, need a fairlead and I've just discovered that the solenoid block hasn't fared well whilst inverted in the garden for a few years.. removed the cover a it was 1 large blob of rust...
  14. Range Rover Mark II / P38
    Here's a couple pics of my new front bumper and winch... Just waiting for one of my sliders to come in!
  15. Range Rover Classic
    My car started its life as a demo vehicle for Land Rover, so it has options added to it. I'm certain the brush guard is a typical, but there is a heavy duty bar that is welded to the frame below it with two plugs and mounting holes. One plug is a standard 110 plug for a block heater. I am...
1-15 of 81 Results
Top