values

Hi All, Does anyone know if the EAS or perhaps nanocom has a set of default setting values (bit values) for the EAS height sensors? The reason I ask is something weird has happened with mine (probably caused by me inadvertently!) Yesterday I took photos (from nanocom) of the stored setting...

2006 Range Rover L322 4.2 Supercharged (66K Miles) I have a GAP diagnostics blue tooth and wanted to check the values on my MAF and O2 sensors. Car runs good and no codes....but I smell rich mixture through exhaust. Is there a list of values I can cross reference my live data to and make sure...

I have been chasing a CEL P1070 and P1074 lean on banks 1 & 2 codes for 2 or 3 weeks now and I can't think of what else to do. The code showed up after the HVAC heater hose (LR006147) broke and I had to remove the throttle body and the air intake to replace it. I have gone through all of the...

Saw this guide on recently rising RRC prices and thought it was an interesting read http://www.classiccarauctionresults.co.uk/range-rover-retro-resurgence/

Any ideas what the resale value for my car might be? 2015 V8 Dynamic Package with 21K miles, 21” Style 507 Wheels. Excellent Condition... Original price $87,330. I’m trading it into JLR for a new vehicle, they’re offering $65K.

On various threads it is recommended to install headstuds instead of the stretchbolts (and a good composite gasket). Since I have (again) a possible gasketfailure (damp sparkplug in cyl. #6 and a rest-pressure in the system when staying overnight) I intend to install the headstuds, but what are...

Any ideas what the resale value for my car might be? Considering other options: 2014.5 V8 Dynamic Package, with 10K miles, Tow package, Upgraded Stereo (850W). Excellent Condition...

Evening, I had my adaptive values reset to hopefully restore some performance/fuel consumption after sorting my plug gaps and cleaning the MAF etc. Went for a drive down the motorway, 10-15 miles. I would say performance hasn't really changed at all, but now as you come to a stop, the revs dip...

Can the adaptive values be reset by draining system power (connecting battery cables). Or, are those values stuck in the ecu or becm? I have a sync mate and it works great. I'm not certain if this is harmful to the BECM though? The reason I ask is I have a freshly rebuilt bosch 4.6 that is...

Hey all, I have a Autel scanner and when I read the ride heights, it shows negative 65mm on the left front and negative 45 on the right rear. The left front is sitting higher than any point on the truck. It was on a rack with the wheels hanging for about a week. I did some major work to the...

...or maybe the previous Owner didn't love it, that's why they sold it. But whatever, I came across this today... I searched within 100 miles of my zip and after a quick scan it looked like used V6 variants are asking between around $79K, which is around what I paid msrp for mine, up to...

There were quite a few posts on here last year indicating lightly used 2013 and 2014 RR's were selling privately for significantly over the new list price. The logic was that the extended delivery times prompted this sellers market. I assumed this 2nd hand market had calmed somewhat until I saw...

95 P38 using ROVACOM to diagnose - Just replaced fuel pump, regulator, filter, and injectors. Still suffering from a disturbingly large fuel trim long term. -160 after resetting adaptive values (seems unique to 95 MY? to not reset to zero?) and it really doesn't correct any lower much past -140...

Hello my friends. I am in the midst of replacing a height sensor (right front) on my 08 Sport and will also need to re-calibrate the EAS. I was wondering if anyone had any general ideas on the Height Values (Stock/Factory Values) for this vehicle. My tires are the stock 255/50/19 on them if...

Hi folks, I carried out a test on ignition coils for my 1996 range rover. I had 2.3ohms for the primary coils resistance...

Firstly what a great site ! I have been a visitor a few times over the last 8 years but have now taken the pluinge and joined up. I have got to re set my EAS levels tomorrow and I have been reading with interest the posts and threads relating to the different issues, FM ! you guys are good ! I...

Hello Fellow members, After a few years of absence I decided to repair the Rangie again. Yesterday I installed new head gaskets and mounted the heads again. Now the question is: Does anyone of you know what the torque values should be of the bolts? I have ARP stud bolts installed, so the...

Hi all, Is there anywhere I can get a list of recommended torque values for the 4.4v8 L322? I have a couple of minor knocks and I'd like to run through as much of the chassis/drivetrain/suspension fixings as possible to make sure everything is correct. Thanks Matt

So I had my engine compression checked. - Front - 130 150 110 120 120 120 110 90 The shop said, that in addition to headgaskets, I would need a piston O-ring job. They recommended putting a used engine in it instead. What do you think? An engine with swap would be about 4k. They also said...

Any of you have a fault mate you can plug in and read the cam adaption values at idle. I am getting a check engine light with cam lamda sesor errors bank1 I dont know which side is bank1. My guess is the cam position sensor is bad or the crank position sensor is bad. The cam adaption values I...