Range Rovers Forum banner
upper
1-16 of 77 Results
  1. Range Rover Mark II / P38
    For anyone curious (as I was) on what the clips and posts securing the upper windscreen trim in place look like.
  2. Range Rover Sport II / L494
    I got a '19 RRS Autobiography, I got 4 zone climate control, but only the lower 2 rear vents are blowing cold air. The ones by the rear passengers head and then the ones behind those only blow what feels like the outside temperature air, so its pretty hot. I can still get the whole car...
  3. Range Rover Classic
    Need to replace the upper tailgate on my 1993. I like the idea of an aluminum option, but the ones I’ve seen have the glass blacked out where the third brake light is. What options would I have that would allow me to keep the brake light? I also want to make sure I can keep the central locking...
  4. Range Rover Sport / L320
    Hi Rovers Ive had a 2007 RRS since November and I’m very happy with it. There are a few issues I want to address but nothing serious. One issue I have is that glass upper tailgate will not open. I didn’t even know it opened until I spotted the gas struts on the glass on the inside. The...
  5. Range Rover Classic
    Hi Guys, On my 1983 resurrection project one of the first things I was replace the weak (probably original) upper tailgate struts that could not keep the window from staying up. I recall I bought them on ebay or something and they are a good fit but I have never been very happy with the amount...
  6. Range Rover Sport II / L494
    Hi All, I'm loving my 2018 RRS Dynamic, but have one issue that seems odd, with wind noise on the highway. This is my 3rd Rover and typically have not experienced this in that in the past. Here are the details: I purchased my rover from a dealer in Chicago as they had the combo I've been...
  7. Range Rover Mark III / L322
    Hello everyone, After a series of unfortunate mistakes, I find myself needing to replace a damaged upper oil pan gasket. I tried to find a post on the replacing the upper oil gasket but could not find one. Only information I found was that i requires the removal of the sub frame. Looking...
  8. Range Rover Mark III / L322
    The one with the torx bolts on either side. I had no problem separating the control arms using a ball joint split, or removing the lower ball joint, The upper with arm separated seems to be a real problem. No access to get a press over it really unless there is some specialized tool I'm unaware...
  9. Range Rover Mark IV / L405
    The upper tailgate release button will not work on my 2013 Range Rover HSE, any ideas??
  10. Range Rover Classic
    Hi all, wondering what ways I can get a key fitted to my upper tailgate latch/handle. Truck came with latch but only key I have for it does not fit it. TIA
  11. Range Rover Mark II / P38
    So I got a non corroded upper rear tailgate in the correct colour - unfortunately the courier smashed the glass so whilst I wait for its replacement thought I’d take off useful bits. So, motor off seals clips 2 buckets of glass vacced up But I see a potential huge problem in fitting the...
  12. Range Rover Classic
    Hey guys, have another question about my '95. The upper tailgate is missing a bunch of the pieces on the inside. I welded the latches back together and got them to work again. However, I have no idea how the central locking works. There is an actuator that moves when the other doors lock and...
  13. Range Rover Mark III / L322
    Yesterday I removed the valve covers and upper timing cases exposing the valve train andcam sprockets (Yes- this is a slow process as I have several other projectsgoing on!). I wanted to pause and install the cam blocks as I have already locked the crank shaft at TDC. In the several videos I...
  14. Range Rover Mark II / P38
    Bilstein 7100 short body reservoir shocks & rear upper mount Switching to a Bilstein 7100 short body remote reservoir to maximize articulation and control the weight of the vehicle better and came across the problem. A short body shock (to get lengths that are appropriate) has a remote...
  15. Range Rover Mark II / P38
    I think that's what it's called. The interior trim piece that holds the middle brake light. Mine was cracked and missing screws. I found another nice one and asked that they include the hardware. They did not. Anyone know where I can get the 4 black screws that fasten it as well as the four grey...
  16. Range Rover Classic
    So I'm slowly catching up on the maintenance of my RRC that I've had for over one year. A few weeks ago I re-did the swivel housing gaskets & wheel bearings/set preload on the driver's side. It's an ABS model, and the top swivel pin had just the one large thrust washer, instead of a...
1-16 of 77 Results
Top