Search Results for ‘transfail’

Good evening, new poster here, been lurking for a while and have gained invaluable knowledge from those posting with similar issues, so a belated thnk you from a pensioner who drives these lovely motors but has less hair an less in the pension pot because of the thing :) I've had an issue today...

manual on all gears work and reverse works. accelerating from standstill is fine then after that, I hear a whine, feel a loss of drive then BAM! I don't know if its 4th or 5th but transfail shows on the message centre. Its in French so it took me a google translate to understand. manual on to 3...

Hello. I have trans fail safe with dtc code p0720, transfer case dtc noise on actuator and short to battery circuit. I read thru the post and aiming towards the transfer case motor but my code reader live data shows voltage is 4-5v and battery at 14.10v. If the motor is OK, what else should...

hi ive been chasing a fault for a couple of weeks now . torque converter monitor fault with a output shaft fault . solved with a torque converter change from jpat. i now have a code still what wasnt solved being a p0720 output shaft sensor faulty . ive checked from the ecu and all seemed...

I bought a 2004 rr 4.4 from a auction car ran fine for 3 weeks no issues other than needed a tune up (spark plugs are original) so here's the issue The car shifts and drives exactly how it should when cold up until maybe 20 mins. After the 20 mins mark trans fail comes on and 5th and reverse...

hii,My 2004 hse is running on a transfail safe program. It all started after car washing, a transbox neutral message appeared, we found that the ECU behind the battery got water. i cleaned the ECU. Afterthat, the ''select neutral'' message is appearing when the car moves. If i speed , transfail...

i phil just became a member yesterday due 2 dicussions on this site are very helpfull, i have a l322 4.4 2003 vogue which has laitly been giving me transfail warning light, changed gear box oil had fault code clearerd but come back fault codes were o2 sencor heater circit bank 2 sencer 2 open...