Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Range Rover Mark III / L322
    Where do you get these bolts? The lower ball joints did not come with new ones, which is unacceptable considering they appear to be torque-to-yield and are all deformed when you remove them. I can't find these bolts on any of the parts websites. Below is the RAVE photo of what I'm talking...
  2. Range Rover Mark III / L322
    I am trying to remove the inner torx on the cam shafts. I took the larger 15/16 bolt off without aproblem reverse thread. The video I saw, Nathan’s Garage, has the inner Torx beingreverse thread as well. Try as I might,its not budging and I am reluctant to wrench on it to hard for fear of...
  3. Range Rover Mark III / L322
    When removing the headliner, RAVE instructs to remove the 15 torx screws securing the headlining to the sunroof and remove the clamp plate. RAVE doesn't provide any guidance other than a simple diagram where it appears one simply removes the 15 screws. However, in reality nearly half the screws...
  4. Range Rover Mark II / P38
    Hi Very quick question. What is the size of the Torx socket for the airbag bolts? (I've seen both E-10 and E-12 quoted so need clarification)
  5. Range Rover Mark II / P38
    Hi All, Would be very grateful if anyone knew the part number for the 4 torx bolts bolting in the SRS passenger airbag. I took out the dash last weekend to sort out the blend motors and one of the bolts has gone a miss. Im going nuts trying to find one online. I don't want to go any further...
1-5 of 5 Results
Top