RangeRovers.net Forum banner

tcase

  1. Range Rover Mark II / P38
    Replaced rear T-case output seal, want to replace nuts and such on reassemble. The seal was easy to find, but most sellers just have that listed, and not all these other things I need. Any help with part numbers would be muchly appreciated. Also, can the spline seal cause much of a leak? So much...
  2. Range Rover Classic
    I'm working with a friend today to swap the Tcase in the Classic. Our plan was to pull tcase while leaving transmission in place, which seems to be suggested by most online. We freed the old BW TC in the Classic from all nuts and everything else holding it on, but cannot get it off the...
  3. Range Rover Mark III / L322
    Good evening! My RR will not move on its own power. I can push it around anywhere....doesn't matter if it's in drive, PARK, reverse or neutral. Several people told me it was the t-box shift motor. I replaced it with one that the guy claims was a good one. From starting, everything "looks"...
  4. Range Rover Mark II / P38
    I have been getting vibrations from the drivetrain and local Indy shop diagnosed it as bad front u-joints and bad TC front output shaft bearing. I removed the front drive shaft and driving around still feel the vibrations, so I thought it could be the output shaft bearing. Today I removed the VC...
  5. Range Rover Classic
    Hello to all, just an info post for the older Classics. Ive tried for months to find the correct lube OIL for transfer case in my '85 (...230 type). Rover calls for many but I located an authorized Mobil distributor locally as Mobil Mobilube HD 90 is recommended. The direct replacement from...
Top