RangeRovers.net Forum banner

switch

  1. Another P38 window switch pack…

    Range Rover Mark II / P38
    Here’s my situation: got water into the pack and the windows, mirrors and sunroof started acting, until they gave up totally. I pulled out the pack, all 12 and 5V power seems correct, the IC seems to follow all the switch actions correctly and I’m getting both 5 and 12V at the regulator exactly...
  2. Alarm going off randomly, hood switch or something else?

    Range Rover Mark III / L322
    Another question about my 2007 Full Size Supercharged. When I lock my car and leave it, the alarm will randomly go off. Way more than it should. It seems like it is worse in the summertime but that could be just a coincidence. When I was driving the range rover daily and parking it at work...
  3. Key Code Lockout / Door Switch question

    Range Rover Mark II / P38
    Hi. I've got a 4.6 that's been sat on the drive for a month, dead battery, key code lockout, wait 30 mins, blah blah. That's fine - been here before. I'm doing everything in the sequence right, but I can't get the door lock to recognise that I'm trying to enter the code. Normally it beeps and...
  4. 2010 RRS glassgate not opening. Switch OK, power at switch.

    Range Rover Sport / L320
    Hi all, can anyonehelp with tailglass tailgate problem on my L320 ​2010 RRS. I have read allposts relating tailglass. My upper tailglass tailgate worked fineuntil one day it stopped opening. All the fuses are fine, no warningsigns and no OBD2 error reading. I can open the whole tailgate butnot...
  5. 93 RRC SWB- Ignition Switch - nearly left me stranded

    Range Rover Classic
    Howdy - wanted to post this issue and see if any of you fine people can comment or suggest what's going on. Once in a while, I'll insert the key into the ignition and it is just absolutely locked up - no movement at all. Each time this has happened in the past, I've monkeyed with it and...
  6. Top boot won’t open- no switch sound

    Range Rover Mark III / L322
    Hi guys - new member, first post. Im sure this must have been discussed before however I can’t fibd anything specific to my car, 2011 tdv8 4.4 the top boot has suddenly decided to not open- no noise when smart key button pressed, no noise when interior button pressed. Am I right to assume the...
  7. Clear light bulb in AMR3964 master light switch

    Range Rover Mark II / P38
    Hi. I’ve been replacing almost all of these small lightbulbs in the switches, the green and orange ones. The bulb in the master light switch eventually broke and I assumed it was a small green one like the others. Turns out it wasn’t. Does anyone know or have seen this type of bulb before? It...
  8. Advice needed: Switch to coilovers (06 RRS)?

    Range Rover Sport / L320
    - 06 RRS - Still on original rear shocks. Fronts replaced last year. - On 2nd Hitachi compressor. This one's lasted 4 yrs. Need to stay with Hitachi as AMK won't fit with my RS sliders Suspension faults firing and RRS is at indy shop now. They say the compressor needs to be replaced and the...
  9. EAS Pressure Switch

    Range Rover Mark II / P38
    Riddle me this those with more knowledge than I. Driving along, watching the Nanocom, Compressor periodically cycles with the pressure switch. Then magically, I get an EAS fault. The stored fault is pressure switch stuck on. But remember, its cycling, causing the compressor to cycle...
  10. Switch Panel Plug - Black Plug Is What Circuit?

    Range Rover Classic
    Dealing with a Euro market RRC here, so the abundant info available for the NAS market trucks hasn't been too useful. Replacing the switch panel after a customs inspector broke it. Found an additional plug behind the panel, along with a vampire tap that will have to be removed. The grey plug...
  11. 2004 l322 headlamp switch

    Range Rover Mark III / L322
    So to get automatic headlights in the car you have to program the car, and in what position does the light switch have to be for this to work? Also if I switch my 2004 to a 2010 switch that has automatic headlights will my also have automatic headlights?
  12. switch speedometer from MPH to KPH

    Range Rover Mark IV / L405
    Hello I have purchased 2013 range rover from london and now i want to change it speedometer from MPH to KPH but i couldnt find anything in settings. could anyone please me out how to change it. the only thing i could change is the digital speed to KPH but the main speed still comes in MPH...
  13. What Does This Switch Do?

    Range Rover Mark III / L322
    Hi Guys, I was pocking around under my dash and I noticed this switch and I've no idea what it's does. It's located on the drivers side below the steering column, the photo is looking straight up from the floor, any ideas? Thanks, Norm.
  14. Theft deterrent kill switch

    Range Rover Mark III / L322
    I searched and didn’t find a post on this. As I have my 05 RR opened up for surgery, thoughts came to me to install 2 kill switches hidden around the driver seat itself. First switch would be tapping into the starter trigger wire by cutting into the wire at the starter and running the wires...
  15. replacing eas pressure switch

    Range Rover Mark II / P38
    If anyone has done it, how do you remove the pins from the EAS connector for the pressure switch? Thanks
  16. Dealer is stumped. Range cluster/hazard switch won't sleep.

    Range Rover Mark III / L322
    Looking for some ideas, folks. 2011 Range Rover L322 Supercharged. Been to the dealer three times in the last week and they don't know what is wrong. Short story: Vehicle will not go to sleep. Hazard light is backlit and the cluster is backlit black. Everything else shuts off after truck is off...
  17. P38 ignition switch wiring

    Range Rover Mark II / P38
    Hi everyone, can someone please tell me what these wires are for in the ignition switch, the connector on my harness is a different type because I have installed a 4.0 p38 v8 engine in a defender body, as well as the steering column, so I just want to know what this clip is used for, I tried...
  18. Driver door Handle Switch - How to remove locks

    Range Rover Mark II / P38
    Hi, My drivers door handle has broken so need to swap the lock over to a new handle. Has anyone got a guide to how to do this with tips etc or special tools required? Tried search but I cant find what I am looking for Thanks Barry
  19. Brake pressure switch

    Range Rover Classic
    Has anyone replaced their pressure switch on the ABS pump? If so can it be simply unscrewed and replaced without interfering with the hydraulic system or will the system need to be bled afterwards?
  20. Dash switch pinouts

    Range Rover Mark II / P38
    Does anyone have the pinouts for the dash switches? like the hazard switch.. want to wire my pump to the now unused eas lock switch ..
Top