Search Results for ‘strip’

Hi everyone, I am the new owner of my first Range Rover HSE. It is a 2011 and i just got it yesterday. I am doing some touch ups to it to get it where I want it like replacing the starter button with a new one, swapping out the lift gate arms, and installing a new roof rail seal as the one on...

Hi There, Ok, had a problem with my steering column not tilting amongst other things. I bought a second-hand steering column unit and fitted it. The tilt and retract work a treat now it is just everything else. I have the air suspension and HDC faults active, SAS needs calibrating...

How do you remove the top windshield trim strip, the service manual just says to takoff the two A pillar trim pieces and "remove" the top trim? Does it just pull out and if so what holds it in when you replace it, are there clips under it, or does the windshield sealant hold it in ? I had a...

Hi i need my rear quarter painting and would like to remove the rubber strip without breaking or damaging it ,Does anyone know how to remove and replace it ,before i start breaking things.Thanks

I would like to replace the polished trim strips in my side moldings. I had done a search the other day and found a mention that someone on the forum had replacements available. I am unable to locate that thread and not sure if that person is still a member of the forum. Any info appreciated...

Hey folks, Anyone know what the black grille with the 3 horizontal chrome strips is from? Are they aftermarket or factory? I do like the look but I can only find it on eBay and I am not sure of the quality and price. If I end up buying I am looking for a more reputable source that is...

Mine is completely parished. I've already purchased a replacement, but from what I am seeing online, it looks like a pain to replace. Does it actually serve a purpose and is it worth doing? Thanks for the help, Darvin

Anyone else see any staining/rust spots on the rear trim piece between the license plate and logo? I can't find it on any other surface that appear to have the same finish. I believe it's plastic with some kind of electroplating applied (doesn't look like paint). The entire surface is covered...

Is this possible without any mods?

I brought my tuned HSE to the dealer Wednesday to have it's one year checkup and oil change done. There were 2 software updates that were performed; a gateway module update (some module between the ecm and all the rest of the modules), and the air bag module update. I asked a couple of fimes...

Hi All, Currently only about 4" of my headed windscreen seems to work. It's a strip right at the passenger (right) side of the windshield. I am aware that the headed windscreen is powered in two parts (by two fuses I believe), although I would assume that if it were simply a bad fuse then at...

Hi everyone, Could anybody advise if how far it's possible to strip the starter motor on a 1996 4.0L P38. Engine was sluggish to turn over from cold, alright when warmed up. Checked battery voltage and got 12.5 v when engine not running, 13.85v running. After watching a you tube video...

Hi Guy's, I have a 2004 TD6 (I had 2 V8's previously). Anyway, I've heard many people describe the sound of the viscous fan like a 'hovercraft' and although some of you may not like this, I actually love that deep throaty sound! So anyway, my question is this, I though I'd bend the bi-metal...

Hi guys, I've removed the black rubber door stripping across the sides of my '95 LWB and spotted a set of holes underneath the rear-most strip. Looks like mounting points for a rear side repeater or something, also sure I spotted some cut wiring behind the panel. Seems odd to me — both the...

Hi all - first post so go easy! Truck is a 95 4.0 SE - Gems with sequential LPG, 156k miles. It's been with me since May/June last year and having repaired all the usual issues: valve block rebuild, compressor rebuild, replace blend motors, replace heater matrix O-rings (bugger of a job!) etc...

Hi, has anyone done this/planning on doing it. I have a santorini black MY2012 RRS that I picked up today. The chrome strip is truly ugly and awkward. I want to change it to a glossy metallic black or matte black color, but car is lease so it cannot be permanent. ANy ideaas? I know it can...

I added black auto wrap to cover the rear trim strip of my 2012. Looks so much better than that strip of plastic. It passes the 6ft eye test but is not the quality I wanted. I ordered a 6ft strip off ebay. I will now take it a qualified auto wrap shop to have it professionally done.

I will be taking the S/C to the drag strip in the next couple weeks. I saw one member did an Auto X. I'll post back my numbers. I would think 13.7-14.0 at 102-104 or in that area..... PBIR in S Florida.