specs

OK, so now that we know that there will be no 2019 model year PHEV vehicles (US spec) what do you think the 2020 model year changes will be? How likely is it that they make no upgrades or changes to options and are just simply building 2019 spec vehicles and badging them 2020? Any price...

So I’m doing a head job on my 2007 L322 non superched and I can seem to find the torque specs and tightening order for the cylinder heads and intake can any one help with this information? I would greatly appreciate it.

Hello, forum I'm toying with the idea of taking the full specs i.e. (ID) and (OD) plus length and bends, to a custom hose shop in my city. Does anyone have the full specs of all the cooling system hoses? I just cant justify spending $320+ dollars on a kit from Atlantic British. If I have to I...

Hello. I have a 2001 Range Rover 4.6 SE which needs the fuel pump replaced. 1. Am trying to determine specific location, how to access, etc... 1. Must I cut a hole in the floor of the vehicle? 2. If so, would anyone know the specs of the specific location? 3. Must the tank be dropped...

I bought a new part # STC1184 ignition amplifier from Amazon for my ’93 LWB, and just verified via RovahFarm.com that this is the correct #. They sell the same part #.I installed it and the truck wouldn’t even fire. Swapped back to my suspected bad amplifier, and the truck started and ran again...

Good day to all, - the front wheels of my rig were looking out of Alignment so I took it to an Indie shop here. They guys sent me to their Tire and Wheel shop. After their inspection I was told the rig needed an Alignment and Camber on both the front and rear wheels. Of course I went ahead and...

Hi All, Do you know what are the specs for the 5.0 v8 Supercharged Compression? I tested compression on my car with all spark plugs removed and with closed throttle. Results are really low: 2 - 105 4 - 95 6 - 100 8 - 100 1 - 115 3 - 120 5 - 120 7 - 125 I performed leak test and there is...

I have a 2011 l322 sc, has anyone figured out/ solved the rear tire wear problem? Alignment specs for the rear are -1.5 degrees camber, that seems excessive. Has anyone tried aligning it to 0 degrees camber on the rear wheels and 0 toe? Thinking of trying it but thought someone may have been...

I have the part number for this for a P38A. From research I have gathered that they are clearly a collectors item and Are very rare to find. Anybody have one? If I got the dimensions I might be able to contact my metal fabricator and have him make me one. I have the ash grey interior and can...

Does anyone know the wheel specs for the style 507 21" wheel pictured below? I am specifically looking for wheel width and offset. I've looked for 21" AT tires and cannot find any. If anyone has any suggestions I would be grateful.

H guys, Iv'e been searching for a couple of hours through a myriad of old posts but can't find the factory wheel alignment specs for early L322. Last week I had an alignment done and my castor appears off. I had a look around google tonight and it seems there is an adjustable camber bolt...

Hello, I'm new to this forum so don't really know how to post things but I need help finding a wiring diagram for the sound system in my 2009 Range Rover Sport. It has the 19 speaker Harman Kardon Logic 7 system in it and I want to install an aftermarket system and use all the speakers. I'm...

Can anyone help me find the correct torque specs for the large retaining axle nut, on a front wheel bearing/hub replacement for an 06 Range Rover Sport HSE? thanks

I was under the impression that Castrol Edge Professional OE 5W20 engine oil would meet the WSS M2C925 spec that is required by JLR. However, I don't that specific reference on the back of the bottles (see below). They only list M2C945 and M2C930. has the spec changed or is there a newer spec...

Does anybody know the torque spec for the inletmanifold to cylinderhead bolts on a 4.6 Gems? Can't find it in Rave and I need a new valleygasket cause it's whistling false air. Any help appreciated. Tony.

hi to all and thanks for all info given, been reading other posts about fuel economy and running specs of motor. came to conclusion that its best to ask before jumping in. I am looking for stats for motor so I can compare with my readings. I have purchased a nanocom comp to read these stats but...

Hello - I have a near mint P38 and am thinking of acquiring a late model series 3. I can't seem to figure out from what I read how the late [2010 - 2012] year model spec/trim levels run. There seems to be a Vogue, a Vogue SE and an Autobiography along with what I glean are the limited...

Hi all, I'm looking into the possibility of fitting the brembo 4 piston or 6 piston front calipers to another car, and hoped you guys could help me out. I've got most of the specs & measurements that i need but can anyone help me out with following, cant seem to find the info anywhere: What is...

SVR 2015.5 Model Year MSRP & Invoice Pricing, Specs, Options JLR made minor changes in the SVR options for 2015.5 model year compared to the prior 2015 spec sheet I posted: 1) Vision and Convenience Package includes Soft Door Close, and InControl Remote and Protect 2) Fixed Panoramic Glass Roof...

Swapping in a 4.6 for my tired 3.9 into my 94 RRC I have an idea of what I need but just looking to see if anyone could steer me in the right direction, I think there may be a typo in the Rave. Its says on page 12 of the 4.0/4.6 overhaul manual the the big end journals on the crank should...