Range Rovers Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 17 Results
  1. Range Rover Sport / L320
    Hey guys, as part of my timing job I had to remove the supercharger, so I thought I would post a pic of what the drain looks like on the back of the supercharger, you can see it's just a hex/allen style fitting (I forget what size): I "suppose" you could change the fluid with the...
  2. Range Rover Mark III / L322
    Here's one for the experts - what size 12-point socket fits the caliper holding bolts on a Ranger Rover L322 MY2010? The vehicle is on jacks; I have a 20mm and 21mm combo-wrench and the 20mm is too small and the 21mm is loose. Could it be Imperial? I thought the bolt was M12. Thanks.
  3. New Member Introductions, No Questions Please
    Just a short introduction. I am still running a modified '38, mostly building parts myself as there seems to be so little out there, and still in the 1st phases of exploring building a 6 wheel '38 camper (very long project) - other than that, little has changed - still a Rangie nut (owned 26 so...
  4. New Member Introductions, No Questions Please
    Hey everyone, just wanted to introduce myself to the forums. The reason I put the "Sort of" portion in my Title is that my wife and I are currently on our second P38 in as many months. To make a long story short, we purchased a 1997 P38 in early August only to have the insurance company "total...
  5. Range Rover Mark II / P38
    Had the top hose go a few days ago, had it all apart and trying to get a suspect air lock out of the cooling system (see other thread!) and noticed the neck of the oil filler that the cap screws into is split. The whole neck thing unscrews and i can see that almost all the way up the fitting is...
  6. Range Rover Mark III / L322
    Well, I finally said goodbye to my 03 L322 a few minutes ago. Sold it for $2,500, which should assist with the purchase of a couple of extra bottles of wine to accompany Christmas Dinner next week. It's been hanging around in the back of the yard, and in the back of my mind, since the major...
  7. Range Rover Sport / L320
    I need help withe the rear brake actuator, when I apply the hand brake I hear a loud squeaking noise coming from the rear of thr car, also the brake light flushing on the dashboard. Does the brake actuator needs to be replaced or can the new wires replaced will take care of the problem please...
  8. Range Rover Mark II / P38
    Guess I'll try again What are the most sort after luxury accessories members have or are seeking? Suggestions could be- 1. Lambs wool over rugs aka rolls Royce 2. Rear pic nic tables 3. Increased leather or wood 4. Sun blind kit 5. Cup holders ....
  9. Range Rover Mark III / L322
    It is with pride I am able to hand the key (an original spare, never used) to my 2005 RR over to my daughter. 94,400 miles. I'd still be driving it for sure if we weren't in need of another car in the family. The RR is pristine. Never even went through a car wash. It has the luxury package in...
  10. New Member Introductions, No Questions Please
    Hi, Rob here, living east of Toronto. I have grown up on English cars, in fact having never owned any domestics. My first drives were off road when I was around 12 or 13 in one of my father's Land Rovers (he still has it!). Over the years there have been other Rovers in my life, including a...
  11. Range Rover Mark II / P38
    Having finally got the dash out of my RR I decided to remove the blend motors so that I could test them and also check that the flaps are't sticking. Nice and easy 10 minute job - so I thought. Well it was until I actually tried to extract the wires from the motors. What sort of genius would...
  12. Range Rover Mark II / P38
    1. EAS She looses about 1" on front right side over 24hr. Air pump has its mind of its own and runs forever on every cold start. I know I have a slow leak but before I start ordering parts and tearing down the EAS can you look at the picture and tell me if its normal. The way metal coupling...
  13. Range Rover Mark II / P38
    My 2001 HSE shudders at around 80kmh which is sometimes felt through the steering wheel but I also notice the passenger seat shaking. I have renewed the following: Tyres Discs and pads Top and bottom swivel balljoints Steering damper All track rod ends Panhard rod bushes Wheel bearings appear...
1-13 of 17 Results
Top