Range Rovers Forum banner
solid
1-12 of 13 Results
  1. Range Rover Mark III / L322
    Are there are direct replacement to the crappy soft lugs nuts for late model L322s? Will the NRC7415 plain steel lug nuts work for 2010-2102 wheels? Any other options?
  2. Range Rover Mark III / L322
    OK, I need some expert advice before I attempt to start tearing stuff apart and this is the place to look. To start I have a 2006 RR HSE LUX w/4.4 AJV8 and 112750 miles on the clock. I have poured over many threads trying to narrow down the engine noise I have. After watching countless videos...
  3. Range Rover Classic
    I have been working through sorting a 93 SWB I bought about six months ago and decided to tackle the inoperative oil pressure light this weekend. I suspected the sensor, but connected a test light between it and the positive terminal of the battery and it seems to be working. With the engine...
  4. Range Rover Classic
    Greeting All, I've just signed up and haven't yet perused the site. I'm on the hunt down for a Classic Range Rover which I intend to utilize as a backup family vehicle and for much intended South Australian off-road work. I'm hunting down a solid model that has the old fashion carburetor and...
  5. Range Rover Mark III / L322
    So as pissed as I am about this, I still felt obligated to give credit where credit is due. Last night a deer jumped out of the bushes only to be smashed by my front passenger side at 35 mph. The deer died instantly (and threw up all over my hood), however I was AMAZED at how little damage was...
  6. Range Rover Mark III / L322
    Evening all – your help is REALLY required please. As with many other people I experienced the Air Suspension fault. Before I came onto here I read all the forums, watched all the videos and thought ‘yep I can do this’ – turns out I cannot. Here is what I have done so far to provide you...
  7. Range Rover Classic
    plated brake cylinders vs solid stainless steel brake cylinders is it worth the money for the solid ones? or should I save the money and just get the much cheaper stainless plated ones?
  8. Range Rover Sport II / L494
    This is not yet a solid conclusion from Consumer Reports about the RRS http://www.consumerreports.org/cro/news/2014/02/2014-land-rover-range-rover-sport-first-drive-review/index.htm
  9. Range Rover Mark II / P38
    Hi all , thought I would post this because info on the inside of the BECM seems hard to find. On a long trip last week end I had the left indicators report blown bulbs but they were all on solid, being far from home I pulled all 3 bulbs out, turned out that's a good thing to do because when I...
  10. Range Rover Mark II / P38
    It's been approx. 12 years since the last P38 rolled off the production line and into the (hopefully) loving hands of one of us. We have figured out pretty much every corner of the vehicle, yet we still are at the mercy of the dreaded BeCM. I am curious as to why this is. What is preventing us...
  11. Range Rover Mark IV / L405
    I came upon this disturbing Edmunds post about the newly svelt RR -- if you hit new range rover 2013 you may be waiting for over month to get it repaired - No parts By zlatopolsky on 04/22/13 13:15 PM (PDT) Vehicle 2013 Land Rover Range Rover 4dr SUV 4WD (5.0L 8cyl 8A) Review Driving I feel...
  12. Range Rover Sport / L320
    Hi, I have a 2007 rr sport, I want to get a new exhaust system and I honestly don't know where to start. My price range is anywhere between 500-800 $. What are some good brands? Other suggestions? I want it to have a "roar" if you will, not a Ferrari roar, but solid and crisp sounding...
1-12 of 13 Results
Top