RangeRovers.net Forum banner

sizes

  1. Vibe Motorsports
    Introducing the Forgiato Flow 001 in 20" 22" & 24" Sizes - Forgiato Flow is intended for those who desire Forgiato’s design language and unsurpassed quality, yet require a more cost-effective entry point into the brand. Forgiato utilizes the latest technology in casting to deliver a...
  2. Vibe Motorsports
    Savini Wheels BM Series BM10 BM11 BM12 BM13 BM14 BM15-19-22" Good Evening Forum community, Working with Savini Wheels to provide you the best ultimate experienced in purchasing your next new wheel set. We will make it happen for you at the best possible price. Not to mention we do offer...
  3. Range Rover Mark III / L322
    Like to run LT285/50R22, dia. 33.27 & width 11.7*0, mud tyre. Currently on 285/40/22 Nittos. Seems as though a 2" lift is needed and trimming or a 3" and a lot less body mod and relocating hard parts. It seems a bit taboo bit I'm leaning towards ditching the air system and going "std" coil over...
  4. Range Rover Sport II / L494
    Just bought a 2014 RRS hse with what appears to be the stock tires and rims - 255/50 (55)?/ 20. Would like to replace tires with something wider. I'm assuming they are 8.5" rims. Will 265's fit? I would think 275's would be a stretch.
  5. Range Rover Mark III / L322
    Hello all. I recently bought a low mileage (68000) 2007 Range Rover HSE 4.4 because for the last 5 years I've so missed my P38 that I had for years before that! She's a beauty, and I want to replace all the fluids so I know what's in it. I've searched the threads and there are bits and pieces...
  6. Range Rover Mark III / L322
    Hi all: I am looking to make up a way to pressurize localized parts of the air suspension to search for a leak that I cannot find with the soapy water trick. I want to put a schrader valve on one end and the appropriate fitting on the other end so that I can pressurize an individual air spring...
  7. Range Rover Sport / L320
    Greetings all, Proud new owner of a 2012 RRS SC Autobiography, and i'd love to get some black aftermarket wheels to complement the whole package. My question is, must i look for specific wheel sizes that specifically fit this autobiography model? I read on an ebay listing (albeit, from a...
  8. Range Rover Mark III / L322
    Hello, looking for bolt sizes. Does anyone know the bolt size for say the bull bar? The front bar under bumper skin has threaded holes for bull bar etc and it would help me if I could buy bolts befor removing bumper skin. Also, anyone know the roof rack bolt sizes? Thank you
  9. Range Rover Mark II / P38
    I have just purchased a set of DISCOVERY 18" for my P38. I know the wheels fit without center rings but what about the Lug Nuts, are Disc11 the same as P38. Now if you know someone who would like a set or 22" KHAN's ????? lol
  10. Range Rover Mark III / L322
    Guys, My apologies if this subject has already been addressed. I looked around and found plenty for the first gen L322, not mine. Here's the deal: I'm looking to replace the door speakers in my 2008 HSE. I'm looking to go with low wattage aftermarket for the speakers, while maintaining the...
  11. Range Rover Mark II / P38
    I recently refurbished the EAS valve block on my 1995 P38 Range Rover with an o-ring kit purchased on eBay from the UK. Touch wood, my Rangie’s air suspension has now been working reliably for more than six months. Just in case of another failure, I bought a spare valve block and am...
  12. Range Rover Mark II / P38
    Just a quickie. I'm fitting a new condenser and receiver, or will be when they arrive, and need to get new O-rings. Are these a standard "air con" size, one for the hot side, one for cold or are they manufacturer specific? They say replace in RAVE but, probably not surprisingly, give no...
  13. Range Rover Classic
    I've noticed my parts supplier lists three sizes of EAS o-rings - 4mm, 6mm and 8mm - which brings a few questions... Does anyone have a list of where the different sizes are used? Does anyone have any additional dimensions, or a cross reference to standard o-rings? I figure there has to be...
  14. Range Rover Sport / L320
    So I've looked through previous messages and I still need to ask..........(and probably a stupid question)......... I have 20" wheels...and I know the OE size is 275/40/20. I went with 275/45/20 (wanted a larger side wall since the potholes in NJ could swallow a small family). Mechanically, is...
  15. Range Rover Sport II / L494
    New to the forum. My 15.5 RRS Autobigraphy will be delivered in March. This forum has a wealth of information and I appreciate all the help. My main concern right now is the terrible reviews (not just from this site but other sites as well) the tires are getting for winter driving. I live in...
  16. Range Rover Mark III / L322
    I'm looking to upgrade my speakers in my 2012 SC and was wonder if anyone has the various speaker sizes or can point me in the right direction
  17. Range Rover Mark II / P38
    O-Ring sizes for engine rebuild - Anyone have a list of sizes? I'm getting ready to put my rebuilt 4.6 back in the P38 and just have to do final touches. The gasket / oring kit I purchased does not have orings for the sensors and other plug ins. Would any of you have a list of replacement...
  18. Range Rover Mark II / P38
    Does anyone know off hand the exact sizes of the bolts for the roof rack. I need the bolts that tighten down the clamps. If you happen to know the size of the bolts that hold the outside covers on (the ones that were those hex safety bolts from the factory), that would be cool too. The covers...
  19. Range Rover Mark II / P38
    Hi, I'm new to this P38 lark - normally under a Classic but time to "modernise" (in another 20 years I'll upgrade to an L322:wink:) - so, bought a 4.6 HSE with Arnott Gen 3 air springs (EAS height settings adjusted by previous owner apparently) - the +2 shocks are still in their boxes - (it's...
  20. Range Rover Sport II / L494
    I found a used set of 20" rims from a last gen RRS. Will they fit on a 2014 RRS ATB?
Top