Hi all, I've a '10 RRS with a siezed engine which I now have out of the car. The problem is to remove the oil sump/bottom plate the flywheel/flex plate needs to get out of the way but since I've had to pull the engine with the Torque converter its near impossible. Pls how do I go about this.

Hi Nice to Join Your Illustrious Group, I have a 2000 model P38 and my sunroof siezed. I found the felt winding on the cable one side had come adrift and totally jammed the cable in the tube. I've cleared and cleaned that and believe the cable should work without out it, however, during...

When replacing the rear disks and pads on my 2000 HSE, 80,000 mile up, I found the fixing bolts for the upper guide pins to be siezed and the heads well rounded off. Not an immediate problem as the pins were good and everything slides freely but its never going to get any better so what does...