RangeRovers.net Forum banner

seal

  1. Stub Axle Oil Seal Replacement

    Range Rover Classic
    For a 1995 RRC w/ABS. RAVE has the following instructions as part of the seal replacement - "Drill and chisel off thrust ring taking care to avoid damaging stub axle". Can the seal be replaced without destroying the thrust ring? Any other tips for replacing that seal? I'm replacing the...
  2. Firewall Seal / Boot for Steering Shaft

    Range Rover Mark III / L322
    Does anyone know the part number or have a parts diagram for the firewall seal (flexible rubber) that the steering column shaft uses? 2007 RR Supercharged w/ tilt, telescoping.
  3. Rear Main Seal leak - Please recommend brand

    Range Rover Mark II / P38
    I have not tackled this issue yet. But, I have a sneaky feeling that the rear main seal is leaking. I used a Victor Reinz seal and was extremely careful when installing it. But, after having issues with Victor Reinz stuff on my son's BMW. I'm very suspicious of their quality and I'm never...
  4. Tailgate rubber seal?

    Range Rover Mark III / L322
    I have a question for you fellow L322 owners. I am a new owner of an 07 vogue.. The upper tailgate on the inside is rusting! Should there be a rubber seal on the inside edge where it meets the lower tailgate ? Mine does not have on which is what I suspect caused the rust ! Does your car have...
  5. re-glue the outer door seal?

    Range Rover Sport / L320
    I just noticed my outer door seal is peeling away from the inside door frame near the roof. Everywhere but the roof it looks good. I would guess it's due to years of washing the truck. Has anyone tried to re-glue it or do I peal it and put new double sided tape on it?
  6. Seal leaking in rear door

    Range Rover Sport / L320
    I just started hearing a lot of wind/road noise from my back passenger door all of a sudden. Felt all around the seals and everything looks good. Anyone have this problem or a solution? I keep thinking I need some felt or cloth automotive tape to add to the door frame to quiet it down. Not...
  7. Replace 1995 glass sunroof seal

    Range Rover Classic
    How is the glass sunroof seal replaced? (the seal around the glass)
  8. Gas cap seal

    Range Rover Mark III / L322
    Has anyone tried to replace the rubber seal on the gas cap? Mine is starting to show cracks in it and I'd like to replace it. Where did you get it from?
  9. Rear main seal question

    Range Rover Mark II / P38
    I've been plagued with a rear main seal leak for about a year. It's about the only repair I don't think I can do as I don't have a good/safe way to drop the trans. My indie mentioned he tries to talk people out of the repair as they usually end up leaking again. Any truth to that? I did have...
  10. Rear main seal leaks 2k miles after total engine rebuild

    Range Rover Classic
    I had my local mechanic (very reputable) rebuild my 4.2L and after 2,000 miles I have a bad rear seal leak. I would say that it drips once every 5 seconds while the car is running at idle. I have cleaned off the bottom of the motor and tranny and I can clearly see the oil coming from a little...
  11. Help with part number - throttle body to intake hose seal

    Range Rover Mark III / L322
    It's impossible to get the intake hose over this seal without pushing it off and it seems to have stretched (no longer fits inside the circumference of the hose). Anyone know the part number?
  12. LTB00291 - sun roof seal

    Range Rover Sport / L320
    Has anyone replaced their sunroof seal as per LTB00291. It says the part is LR018247 but I think this is the part for the whole glass and the rubber is actually LR023393. Like most owners I've had leaks and regularly check the drain tubes, but I do get a fair bit of noise from the sunroof and...
  13. Transmission output shaft seal

    Range Rover Mark II / P38
    Anybody know of an alternative supplier for this? All my searching is only coming up with the Genuine part which is $40. Any help is appreciated. Just found this ZF part # W0133-1621832 listed as the extension housing seal but doesn't give any specs on it.
  14. RRC Upper Tailgate Seal Problem

    Range Rover Classic
    Hi, I've found that when the upper (aluminium) tailgate is closed it rolls the seal out of the channel in the centre. The seal channel seems reasonable but the seal seems quite hard - is the seal supposed to be softer or can you adjust anything to help the sealing? Thanks for any help Chris
  15. transfer case bearing and seal

    Range Rover Mark II / P38
    am looking for the part numbers for the transfer box output shaft bearing and seal (for the front prop) i know the bearing can be replaced. i have a whine starting in the drive train and i have noticed the seal is starting to leak,also there is a bit of play in the bearing as i can lift the...
  16. 04 RR-HSE rear door seal problem of water seeping (DIY)

    Range Rover Mark III / L322
    Gentlemen: While some writing has been done in the forum about this topic of water seepage through the rear door weather strip, whenever you go to the "Stealers" they give you the "what are you talking about answer" Is there any way that we can DIY to correct this annoying problem of water...
  17. Inner Door Seal vendors?

    Range Rover Mark III / L322
    Am I out of the loop? I cant find an online searchable diagram to price out some door seals. The rear door seals (the ones that attach to the body) are toast from age I guess. Before I slump off to the dealer I would like to at least have some knowledge as to what they cost.
  18. bumper seal/trim repair options

    Range Rover Mark II / P38
    I'm not sure what this seal or rubber trim is called but can someone recommend how I should go about repairing the loose seal between the bumper and rear pannel shown in the picture below Would I be better off replacing it with a new strip or glueing it back in? Also if someone else on here has...
  19. 2007 L322 rear door seal clips

    Range Rover Mark III / L322
    Hi everyone, I'm a new RR owner, just purchased a 2007 SC and am loving it to pieces, the perfect vehicle for a British expat living in MN :) Question - I've seen this posted somewhere else on the forum but I'm wondering if anyone has a creative solution to this. The rear door seals are falling...
  20. Valve Stem Seal part #

    Range Rover Classic
    hi folks i am new to this forum and new to RRC i haven't hd mine long but it overheated and died. the engine is being rebuilt but i need help with a part number please its for a 1990 3.5 V8EFI the guy here tells me its an oil seal for the valve? not sure i can do most things but this is beyond...
Top